Pioneering the frontiers of waste-to-energy technology

Technology

American Renewable Technology (ARTI) designs and builds burners, pyrolysis, and gas-to-liquid components and integrated systems.

Low Nox Burners

Our proven Super Low Emission (SLE) burners achieve the lowest NOx emission levels (5 to 9 PPM) and CO emissions (20 to 50 PPM) in the world with the highest operating efficiency. These very low emission levels are achieved while operating the burners at actual oxygen levels of 3.0% or lower maintaining the highest boiler efficiency performance in the world. Our burners meet all South Coast Air Quality Management (SCAQMD) requirements..

Pyrolysis

ARTI manufactures a system utilizing pyrolysis which is capable of converting a variety of waste materials including municipal solid waste, post-consumer plastics, tires, bio-solids and virtually all other biomass and hydrocarbon based materials into highly valuable commodities including pyrolysis gas and carbon. This system is the culmination of years of research and development by testing the numerous feed stocks leading to commercialization of the process. Most importantly, the ARTI process has direct operating experience with municipal solid waste, tires, animal wastes and human waste among others. ARTI currently manufactures modular pyrolysis systems in the following sizes: 24, 36, 48, 54, 60, & 72 tons per day.

Gas-to-Liquid

ARTI has developed its own patented gas-to-liquid system using a cobalt-based catalyst in its proprietary designed reactor. The ARTI gas-to-liquid technology works with various feedstocks, including natural gas and industrial off-gas, heavy crude oil, refinery byproducts, and coal and petroleum coke, among virtually all other carbon-bearing materials because of its ability to convert these product into gas via its patented Pyrolysis system. The ARTI patented gas-to-liquid technology primarily produces clean-burning middle distillates such as diesel and jet fuel and naphtha along with specialty products such as waxes, petrochemical feedstocks, fuel cell feedstocks and synthetic lubricant base stock. ARTI currently manufactures the following standard modular Gas-to-Liquid Systems: 100 barrels and 1000 barrels per day. Custom engineered systems are also available.

Products

ARTI's Energy Conversion Processor (ECP) has been designed to convert energy from all organic, bio-degradable or hydrocarbon-based waste such as plastics, paper, rubber, medical, green, and or human and animal waste. All units are designed and built for efficient and continuous operation while producing high quality gaseous and liquid fuels. The efficiency of the units is entirely dependent on the purity and the energy content of the waste material.

Pyrolysis Systems

Gas-to-Liquid Systems

Burners

Systems

ARTI has deployed 20 systems to 10 different countries across the globe

  • 2015

    Los Angeles, CA

    Process: Pyrolysis

    Operation: New installation

    Capacity: 24,000 tons/year

    Feedstock: Sewage sludge

  • 2015

    Slovakia

    Operation: New installation

    Capacity: 8,000 tons/year

    Feedstock: Biomass

  • 2014

    Aruba

    Capacity: 26,200 tons/day

    Feedstock: MSW

  • 2014

    Turkey

    Capacity: 12,600 tons/year

    Feedstock: Chicken manure

  • 2013

    Hudson, CO

    Capacity: 52,000 tons/year

    Feedstock: Tires

  • 2013

    Bistrita, Romania

    Capacity: 8,400 tons/year

    Feedstock: MSW, tires

  • 2012

    Chino, CA

    Process: Pyrolysis

    Capacity: 15,000 tons/year

    Feedstock: Cow manure

  • 2012

    Chino, CA

    Process: Gas-to-Liquid

    Capacity: 15,000 tons/year

    Feedstock: Cow manure

  • 2012

    Portland, PA

    Capacity: 8,000 tons/year

    Feedstock: Plastic

  • 2012

    Brisbane, Australia

    Capacity: 16,000 tons/year

    Feedstock: Coal

  • 2009

    Korea

    Capacity: 1,000 tons/year

    Feedstock: Tires

  • 2008

    Carson, CA

    Process: Pyrolysis

    Capacity: 250 lbs/hour

    Feedstock: Bio solid

    Yield: 30,000 gal/year diesel

  • 2008

    Carson, CA

    Process: Gas-to-Liquid

    Capacity: 250 lbs/hour

    Feedstock: Bio solid

    Yield: 30,000 gal/year diesel

  • 2008

    Zheijang, China

    Capacity: 8,000 tons/year

    Feedstock: Medical waste

  • 2007

    Tacoma, WA

    Capacity: 500 lbs/hour

    Feedstock: Tires

    Yield: Tire oil and carbon

  • 2007

    Tennessee

    Capacity: 1,000 tons/year

    Feedstock: MSW

  • 2006

    Milan, Italy

    Capacity: 1,000 tons/year

    Feedstock: Waste plastic

  • 2004

    Chino, CA

    Capacity: 1,500 tons/year

    Feedstock: Cow manure

  • 1993

    Dalian, China

    Capacity: 73,000 tons/year

    Feedstock: Tires

Company

Our mission at American Renewable Technologies of California, Inc. (ARTI) is to provide the world with an environmentally and economically practical solution for wastemanagement and renewable energy production. We are constantly innovating with our customers and providing them worldwide with reliableand high quality solutions that meet their key challenges in waste management. The ACTI Energy Conversion Process is capable of converting waste into renewable energy through an environmentally friendly process. This system provides solutions for several environmental and economic problems facing the world today.

FAQ

Frequently asked questions

Contact Us

Send us some information about your project and one of our salespeople will follow up with you